Friday, December 13, 2013

How to fix a coolant leak at the water outlet on a 2.4L GM Pontiac Grand Am


    The coolant leak is a major one and hard to pinpoint. It appears to come from driver’s side of the engine. It continues to leak as the car is parked. Inspection reveals a very wet spot on the rear of the engine below where the water hoses exit the engine. Some dis-assembly is needed to locate the source of the leak.
1) Unplug electrical connector from the spark plug assembly.
2) Unplug electrical connector from between the valve banks
3) Unplug electrical connector from sensor in water outlet.
4) Remove large rubber air intake hose to get view of PS pump and coolant union.
The leak is now apparent at the bottom of the black plastic water outlet where it seats on the engine. The upper radiator hose exits here as well as a heater hose and an overflow from the recovery tank.

The water outlet

5) Drain coolant. Remove clamp from lower radiator  hose with vice grip pliers. Use channel lock pliers to free the stuck hose.
6) Reattach hose, clamp with screw clamp and put coolant into a bottle.
7) Strain coolant for reuse if desired.
8) Remove heater hose clamp from hose at water outlet.
8) Detach heater hose from water outlet. Used blow dryer to heat hose when it wouldn’t come off cold. Some coolant escaped.
9) Detach upper radiator hose from water outlet.
10) Remove the 10mm bolt holding mounting the overflow line just above and to the right of where it comes into the outlet.
11) Unbolt the two 10mm bolts holding the outlet to the engine.

Use a 10mm socket to remove the two bolts holding the outlet


12) Pull the outlet out and disengage from the overflow line. The inner part of the outlet had deteriorated and separated from the seal, causing the leak.

The outlet disintegrated

13) Get a new water outlet. I got one from Advance Auto sold under the name Factory Air part # 85164. For $10.39. Made in China. OEM was $29. I prefer OEM in most cases, but this is hard part for the after marketers to screw up.


                                                                         Installation
1) Remove the temperature sensor from the old part. Clean the threads and apply teflon tape to the threads. Install on new outlet.
2) Install a  new o-ring on the water outlet.
3) Install a new o-ring on the return line. This is included with the replacement water outlet.
4) Clean the water outlet mating surface on the engine.
5) Insert the return line into the water outlet
6) Careful insert the outlet into it’s port on the engine. It will not seal all the way with hand pressure.
7) Hand thread the two 10mm bolts water outlet bolts.  Then alternately tighten them up with ratchets. I used a ¼” drive on the hidden one along with a 6 inch extension bar. 3/8” works on the exposed bolt.
8) Seat the heater hose on the water outlet and clamp down. I used a new 1 inch screw clamp.
9) Seat the upper radiator hose onto the water outlet. Use a new clamp.
10) Seat the heater hose and install a new clamp.
11) Re-install the air intake duct
12) Fill with coolant
13) Run engine and check for leaks.

                                                        


Here are a couple of videos I made of this job.






42 comments:

  1. Thanks so much for posting on internet as this helped me tremendously on my 1996 Grand AM with the same problem. GM’s plastic water outlet doesn’t do justice to a poor quality part that should have been made from metal. If you’re ever into making another video on this particular vehicle, I would sure like to see you tackle how to change thermostat or water pump to the Grand Am. GM should be sued for poor location and the amount of work it takes in changing the water pump or thermostat to this vehicle with the 2.4 engine. It’s obvious they wanted to make it hard to do so their GM mechanics had something to brag about upon fixing it.

    Again thanks so much for posting.

    Steve

    ReplyDelete
    Replies
    1. You're welcome and thanks for using the post and commenting. I still have the car and will for awhile, so if those parts need changing, I'll tackle the job and make a post. Thanks again!

      Delete
  2. Nice article. I think this is the part I was looking for to fix our grand am. Should be easy fix.

    ReplyDelete
  3. Very helpful information. Took us about 3 hours to do the job... most of the time looking for tools and trying to get access to the various bolts. Had to use an air impact driver to remove the right-hand bolt holding the water outlet to the engine. Also, the lines from the power steering unit were right in front and couldn't be moved without removing the unit from my wife's 99 Grand Am. So, I worked around it. Thanks again for the great video and pics.

    ReplyDelete
    Replies
    1. You're welcome. And thanks for adding the additional information about your experience with this job. It sounds like yours was harder than the '97 I worked on.

      Delete
  4. I think the content covered in the blog is quiet impressive and brilliantly conveyed. I have been looking for such information since from few days....Thanks!
    Dustin T

    ReplyDelete
    Replies
    1. I'm glad this post helped you. That's why I take the time to put them together.

      Delete
  5. Please help there is a word on a part under the engine coolant surge tank that says purge with a tube ccoming out of it what does it mean I hace a 2.4 1996 pontiac grand am

    ReplyDelete
  6. One must also realize the importance of getting it fixed as soon as possible, for if the problem persist it can ruin the house, quite literally.
    Check This Out

    ReplyDelete
  7. You will likewise spare you cash if a handyman needs to work in your home since he won't need to invest energy hunting down the stop cockerel.
    Plumbing services

    ReplyDelete
  8. Plumbing related problems are common, given the cold temperatures in Chicago. Plumbing service

    ReplyDelete
  9. whether you require a plumber at home or a commercial place to overcome a crises situation, professionals from reputed organizations are always available to help you. plumbers hall

    ReplyDelete
  10. A little research about the same will easily get you a list of dependable contractors with great expertise. If you are in the verge of hiring professionals in Commercial Plumbing in Midlothian VA, you must check whether he is insured and bonded. You will also get a confidence and feel that you are having legal protection with the plumbing service.Contractors Today

    ReplyDelete
  11. Pipes situated near sinks and toilets are vulnerable to leaks, frequent freezing, and noisy rattling noises. plumbers kansas city

    ReplyDelete
  12. The Whole Building Design Guide, a far reaching online data asset for contractual workers, planners and draftsmen, gives a decent working meaning of pipes building:Turn Key Repipe Florida

    ReplyDelete
  13. Some of the time over the long haul residue get gathered inside the radiator unit as a result of customary utilization of the warming component.click here

    ReplyDelete
  14. Does anybody know the torque specs for the two bolts of the water outlet?

    ReplyDelete
  15. I'm not suggesting that you drift over their shoulders but rather watch their work, make inquiries, and if material, take pictures at different phases of the activity.Drain Blasters

    ReplyDelete
  16. Repairing the highly advanced modern boilers like the combi-boiler requires better technical skills than needed for the standard boilers. Therefore, it is often costlier. http://heatcarenorwich.co.uk/

    ReplyDelete
  17. Really nice post, your blog is interesting and so informative. Wait for your next blog post. pump foundry

    ReplyDelete
  18. We are truly thankful for your blog entry. You will discover a great deal of methodologies in the wake of going to your post. I was precisely scanning for. A debt of gratitude is in order for such post and please keep it up.  this page etc

    ReplyDelete
  19. Get points of interest of any certifications. This is important both for the work he does and for the things he has bought. Plumbing

    ReplyDelete
  20. If you have problems with your plumbing system, one of the most important things that you can do is to get a plumbing contractor. Drain cleaning

    ReplyDelete
  21. You make so many great points here that I read your article a couple of times. Your views are in accordance with my own for the most part. This is great content for your readers. Tankless Lab

    ReplyDelete
  22. I have used a lot of juicers in the past and I created this blog to help juice lovers make the right decision in choosing the type of juicer that best fit their needs. There are several good masticating juicers to choose from.  layflat hoses

    ReplyDelete
  23. I respect this article for the very much investigated substance and magnificent wording. I got so included in this material that I couldn't quit perusing. I am awed with your work and aptitude. Much obliged to you to such an extent.https://www.smartwheater.com

    ReplyDelete
  24. Interesting topic for a blog. I have been searching the Internet for fun and came upon your website. Fabulous post. Thanks a ton for sharing your knowledge! It is great to see that some people still put in an effort into managing their websites. I'll be sure to check back again real soon. Rheem RTEX-13

    ReplyDelete
  25. I comprehend it would cost you a significant entirety yet it merits the take! At whatever point there is an irredeemable issue, individuals resort to the administration of the experts who never dawdle winking on what they need to do thusly. basement waterproofing

    ReplyDelete
  26. I am come here first time, i find the perfect article. Thanks for sharing interesting and informative post. Gutters Raleigh

    ReplyDelete
  27. We are truly thankful for your blog entry. You will discover a great deal of methodologies in the wake of going to your post. I was precisely scanning for. A debt of gratitude is in order for such post and please keep it up.  Gutter installation companies

    ReplyDelete
  28. Great info! I recently came across your blog and have been reading along. I thought I would leave my first comment. I don’t know what to say except that I have. Gutter Repair Company

    ReplyDelete
  29. I’m going to read this. I’ll be sure to come back. thanks for sharing. and also This article gives the light in which we can observe the reality. this is very nice one and gives indepth information. thanks for this nice article... Oceanside Water Heater Repair

    ReplyDelete
  30. The Whole Building Design Guide, an extensive online information resource for authoritative laborers, organizers and sketchers, gives a better than average working significance of channels building. Gpsnest

    ReplyDelete
  31. wonderful blog & knowledgeable post at-all Continued

    ReplyDelete
  32. At the point when you call your plumber with an issue in your home, it might assist you with having some thought of what he will ask you. The inquiries that a plumber postures will assist him with determining the issue with your plumbing framework and will likewise assist him with assessing the best technique to fix the issue. If you want to know more, Please check out here: plumber singapore

    ReplyDelete
  33. Very good topic, similar texts are I do not know if they are as good as your work out. custom patches

    ReplyDelete
  34. At Aquatech Basement Waterproofing Toronto, you get an experienced and cost-effective privately owned company. You get the highest leaky basement quality services, basement waterproofing, wet basement and foundation repair in Toronto. Based out of Toronto, we’re proud waterproofers. We operate several waterproofing teams throughout the greater Toronto area. We always have someone conveniently located in your service area. Whether you are in Oakville, Ajax, Scarbrough, Hamilton, Richmond Hill, Thornhill, Downtown Toronto, Toronto, Metro Toronto or any other city we serve.

    Basement waterproofing toronto
    Basement waterproofing toronto
    basement waterproofing mississauga
    Basement waterproofing toronto
    Basement waterproofing toronto

    ReplyDelete
  35. The rear of the Quad 4 Grand Am's powertrain is covered in a complex piping system. A coolant pipe connects the driver's side to the passenger side of the motor around the back. This line connects to the radiator outlet hose on the passenger side, which goes to the radiator and the coolant bottle. The other side curves up to the thermostat housing and water pump before running to the driver's side.

    ReplyDelete