Friday, December 2, 2016

How to repair a broken chip-type ignition key

    I was surprised when a family member handed me a two piece remote access chip-type ignition key. I knew this key would cost $350 to replace so I was going to do all I could to put it back together again. This is a Toyota key.



The plastic holder of the metal key had broken apart and separated. I was amazed at how little of the cut, metal portion of this key actually overlapped with the plastic part.  My first thought was that this could be simply snapped together again.

Just slip it back into the broken slot. Good enough....right?


The First Try

     I tried to fix this with minimum effort. The metal top of the key snapped very snugly into the plastic holder. Then the back cover snapped over that and made a quite tight fit. Surely this would hold together. On the second or third ignition turn it came apart.

The Second Try

    I should have glued the broken seam back together. Yeah, that's why it came apart again. So I got out some used super glue, snapped the key back in the slot and glued the seam. I clamped it together and let it dry awhile. I have seen super glue hold broken parts together many times. This time it held for about 3 days before I had the two pieces back in my hand again.

The Third Try

     I figured it out. I didn't apply glue on enough of the surfaces of the key. Surely more glue was all that was needed. I bought a fresh pack of glue. That old glue maybe wasn't good anymore.  I glued it and clamped it for the last time. This time jut two turns of the ignition put it back in my workshop.

The Fourth (and final?) Try

     I had been turning over the idea of a mechanical bonding of the the parts for awhile and now it was time to carry out that plan. I decided to drill though the casing and the metal of the key and basically bolt it together. I decided that size four hardware would be too dainty so I used #6. The head of the Philips screw would rest flush against the flat surface of the damaged plastic. Then the back cover would snap over it. Here are the steps that proved effective:

1) Insert the metal portion back into the plastic holder and reassemble the key.

2) Carefully center punch the plastic back of the key.  I used a spring-loaded punch to help center the hole in the plastic portion. Then I drilled through the back plastic part.

3) Remove the metal portion from the assembly.

4) Drill through the rest of the plastic.

5) Drill the metal part of the key. This is the tough part. The drill bit left a mark on the metal portion of the key. I punched that and used a sharp drill bit to drill a precise hole. I used a 9/64" drill bit for the hole. The #6 screw would be a close fit.

The tough part of this job is underway


6) Re-assemble the whole key and check for good alignment on the hole. Make sure the screw goes through the hole cleanly. If not remove material from either part to make it fit. Test fit the hardware.I would have to flatten the head of the screw on a bench grinder and grind out the under surface of the back of the key to make the cover snap over it.

ready for the hardware


7) Measure the length needed for the screw. I was using an acorn (or "cap") type nut so I had to be sure the length was right so it would not bottom out when tightened. Also account for plain and lock washers. In this case the nut would have to tighten against a sloping surface. I had to taper the washers on a grinder to make it sit flat and hold.

8) Cut the screw to length. I placed a nut with a back-up nut at the cut-off point. Then I put it in a vice and cut it off cleanly with a cut-off wheel on a Dremel Tool.

9) Assemble the key with the hardware fix.

Note the flattened screw head and tapered washers


10) Test. This repair is going to hold up. This key will be stronger than it originally was. I have seen a screw used in other remote access keys,



                                                 

19 comments:

  1. locksmith to come to your rescue at any time of day or night. Whether your locksmith emergency is due to lost car keys, lost house keys, or burglary damage repair, you can rely on flatratelocknkey-denver Locksmith Pros for all your emergency locksmith issues. Our team of mobile locksmiths are on call 24/7 and will come to your location in a 30 minute response time with all the tools and equipment needed to solve your problem.

    ReplyDelete
  2. It is a great way to repair broken chip type ignition, I have learn a lot from your post, It is an impossible way but try and try It is possible. Find the best service place for car key remote replacement for your car.

    ReplyDelete
  3. These shamefull auto manufacturers whom are guilty of building unsafe vehicles and deadly airbags,etc etc! Then they go and make sure this crap is built to break forcing hard working folks to shell out a fortune to their "STEALERSHIPS" for something so stupid as damn replacement key!!!
    MyToolsLab

    ReplyDelete
  4. Nice article, which you have described very well about the key remote. Your article is very useful for those who are looking to buy keyscan key fobs in Vancouver. thanks for sharing...

    ReplyDelete
  5. Wow very informative post. thanks for sharing this article. we also provide the best Locksmith Wareham MA at affordable price. for more info visit our website.

    ReplyDelete
  6. a particularly pleasant bit of article. Much obliged to you for sharing your insight. This is a truly important thing you shared. great stuff!!locksmith san antonio

    ReplyDelete
  7. I am very thankful to you for sharing this best knowledge. This information is helpful for everyone. So please always share this kind of knowledge. Thanks. Locksmith Baltimore County

    ReplyDelete
  8. Great post, your all points fully clarified all topics by this post. These steps are helpful for online accounting services. Thank you for providing such valuable information.Masterkey Locksmiths Banks Nd

    ReplyDelete
  9. I liked your work and the way in which you have shared this post here about replacement car remotes It is a beneficial and helpful post for us. Thanks for sharing an article like this.

    ReplyDelete
  10. Nice info, This information will always help everyone for gaining essential and good information. So please always share your valuable information. I am very thankful to you for providing good information. Read more info about rubber seals

    ReplyDelete
  11. Excellent job, this is great information which is shared by you. This info is meaningful and factual for us to increase our knowledge about it. So please always keep sharing this type of information. Read more info about Tractor Spare Parts Online

    ReplyDelete
  12. The article you've shared here is fantastic because it provides some excellent information that will be incredibly beneficial to me. Thank you for sharing about car Mechanic Perth. Keep up the good work.

    ReplyDelete
  13. You have given important data for us. It is excellent and informative for everyone. Always keep posting. I am very thankful to you. Case dozer Undercarriage Parts

    ReplyDelete
  14. Really, this is very important information which is shared by you. This info is meaningful and important for everyone to increase our knowledge about it. Always keep sharing this kind of info. Thank you. Read more info about Cirencester taxi firms

    ReplyDelete
  15. Great job, this is good information which is shared by you. This information is very meaningful and factual for us to increase our knowledge about it. Always keep sharing this type of information. Thanks. Read more info about Accessori auto di alta qualità online Italia

    ReplyDelete
  16. Your blog contains lots of valuable data. It is a factual and beneficial article for us.Urine pre employment screens Adelaide Thankful to you for sharing an article like this.

    ReplyDelete
  17. You've written a very useful article about quality rfid locking systems. This article provided me with some useful knowledge. Thank you for providing this information. Keep up the good work.

    ReplyDelete
  18. You'll go to your dealer for any locking problem, you'll call a locksmith to help you at the minute since a merchant isn't continuously reachable and on call. An open car through phone call benefit will offer administrations without wavering. They are in a position to assist. It is terrifying to be out at night and your car entryway is bolted.

    ReplyDelete
  19. The delightful article you have posted here. This is a good way to increase our knowledge. Locksmith Baltimore County Continue sharing this kind of articles, Thank you.

    ReplyDelete